RETURN

Modular system:
In the modular system several independent modules carry out the same functions as the main units. There are diverse types of power supplies, sources of audio, as tuners FM stereo and mono, MP3 player or input modules for other musical sources.
There are also optional modules for telecontrol. (The telecontrol acts through wire 15 of the left channel).
This system is more flexible as for number of channels, being possible to distribute the audio sources throughout the installation. The auxiliary power supplies can also be placed in any part of the installation if it is necessary.

Equivalent products:
We can also complete 4 channel installations combining a different number of input modules PC3110, MP3 players PC3680 and stereo tuners PCD3666 in a different way as shown in the example. In this case we need to install a control with built-in tuner PCP1271 as audio source for all the installation; it's necessary to place a bridge in the corresponding terminal.

Cable to be used:
The connection to the distribution line can be carried out using cables, Mod. P9960 (para 4 canales mono / estéreo, con o sin scan e intercomunicación) o con cable P9940 (para 4 canales mono, con o sin avisos)

Material used in the example:
1 P3262 power supply - 3 input module PC3110 - 1 control PCP1271 - 4 frames KCP9300 - 3 sound source connector P4075 and optionally 1 telecontrol module PC3810 - 1 socket module PC3811 - 1 frame KC9302

Installation recommendations:
The connection to the 230V mains electricity supply will be made using 1 mm² wire gauge minimum with double insulation. It is also essential to connect the earth for safety reasons and improved operation.
It is recommended that the mains electricity supply cables are as far away as possible from the exchange circuits.
The system cabling should be carried out separately from the mains electricity supply in keeping with regulations.
Do not locate this product in damp areas, near to sources of heat or in potentially explosive atmospheres.
The connections to the mains electricity supply, installation, wire gauge and conduits will be carried out in keeping with Directives and specific current regulations. The installation of a specific mains switch for sound installation is recommended.

Terminals:
L - Fhase (220/230 V AC)
N - Neutral (220/230 V AC)
T - Earth (protection conductor)
0 - Scan - (connect if you want the remote change of radio station in the Sonelco tuner)
2 - Positive - Voltage output 16 V DC nominal / 4.5 A maximum.
4 - Negative - Supply and signal ground
15 - Audio - Channel 1 Left - 3 V RMS max.(in module PC3810, input for telecontrol activation)
16 - Audio - Channel 1 Right - 3 V RMS max. (from terminal 16 on the input module PC3110)
25 - Audio - Channel 2 Left - 3 V RMS max..,(from terminal 15 on the input module PC3110)
26 - Audio - Channel 2 Right - 3 V RMS max. (from terminal 16 on the input module PC3110)
35 - Audio - Channel 3 Left - 3 V RMS max.,(from terminal 15 on the input module PC3110)
36 - Audio - Channel 3 Right - 3 V RMS max. (from terminal 16 on the input module PC3110)
45 - Audio - Channel 4 Left - 3 V RMS max.,(from terminal 05 on the control PCP1271)
46 - Audio - Channel 4 Right - 3 V RMS max. (from terminal 06 on the control PCP1271)
ANT - Antenna.If there is no 75-ohm antenna signal available in the installation, a 75 cm long. cable can be used as antenna. (from terminal in the control PCP1271)
GND - Antenna ground (from terminal in the control PCP1271)
BRIDGE - For configuration in tuner mode ( termianl of the control with local tuner PCP1271)